Dunlop Trade AU
Home » SDS NZ
How to Calculate in m2:Measure the width and the length in metres and multiply the width and the length together.
Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.
Guide for depth thicknesses:The Dunlop Construction Grout can be used to achieve an application thickness of between 5mm to 100mm.
How to measure linear metres::Measure the length of the surface in metres.
Guide for thickness:The Dunlop Floor Repairer Rapid Patch can be used to patch from feather edge, 0mm to any thickness. Ideal for ramping from a feather edge to normal screed thicknesses - 15mm to 30mm.
Guide for thickness:The Dunlop Rapidset Repair Mortar can be used to patch from feather edge to any thickness.
Guide for thickness:The Dunlop Timber Floor Leveller can level from 0-12mm without the addition of aggregate and 12-30mm with the addition of 2-5mm aggregate.
Guide for thickness:The Dunlop Ardit Floor Leveller can level from 0-10mm without the addition of aggregate and 10-50mm with the addition of 2-5mm aggregate.
Guide for thickness:The Dunlop Multipurpose Floor Leveller can level from 0-10mm without the addition of aggregate and 10-25mm with the addition of 2-5mm aggregate.
Guide for thickness:The Dunlop Multipurpose Acrylic Render can be used to achieve an application thickness of between 2-10mm
Guide for thickness:The Dunlop Multipurpose Fine Coat Render can be used to achieve an application thickness of between 2-5mm
Guide for thickness:The Dunlop Ready-to-Go Render can be used to achieve an application thickness of between 1-5mm
How to calculate in linear metres:Measure the length of the surface in metres.