Browse Dunlop Ready to Go Coloured Grout - Dunlop Trade

Our Products

Dunlop Ready-to-Go Coloured Grout

An easy to use premixed coloured grout containing Grout Shield. The applicator boasts easy application with no mixing required, hence no mess! Rejuventates old grout.

  • A ready to use grout (no mixing required)
  • Easy to use with less mess
  • Contains Grout Shield – Anti Mould & Bacteria Technology
  • Rejuventates old grout
  • Available in a wide range of colours
Tile Types

Ceramic, porcelain, marble, granite and mosaics (excluding moisture sensitive stone)

Surfaces

Walls and floors

Location

Indoor and outdoor

Colour & Sizes
Colour
Size
Item Code
Ultrawhite 800g/1.5kg 25333/38758
White 800g 11255
Buff 800g 11259
Travertine 800g 12865
Misty Grey 800g 12864
Magellan Grey 800g 38757
Slate Grey 800g 11258
Charred Ash 800g 38756
Jet Black 800g 11257
Joint Width

Suitable for joints between 1mm and 5mm

Coverage
Tile Size
 Joint Width
L x W x Depth 1.5mm 3mm 5mm
25 x 25 x 4mm 1.04m2 0.52m2 0.31m2
100 x 100 x 8mm 2.08m2 1.04m2 0.63m2
200 x 200 x 8mm 4.17m2 2.08m2 1.25m2

This table shows approximate coverage per 800g bottle. Allow an extra 10-15% for wastage due to application technique, tile types and job site variations.

Technical Datasheet

Safety Datasheet – Australia

Share this product

You might also need

Dunlop Grout Sealer

A water-based protective sealer which penetrates and cures within the pores of the grout. The sealer is fast drying and the bottle contains a brush for easy application.

Dunlop Natural Look Sealer

A water based, penetrating sealer. It maintains the natural appearance of the surface whilst offering superior stain resistance of both oil and water based stains making sealed areas easier to clean. Suitable for indoor and outdoor use with excellent UV resistance, it is suitable over a wide range of surfaces.

Dunlop Tile and Grout Cleaner

An effective and easy to use everyday neutral cleaner that will remove general household dirt, grime and oils on tiles and grout.

Dunlop Tilers Rubber Modified

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Tilers Mastic Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Grout Paint

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ardit Feather Finish

  • (type in the square metreage number only)

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Vinyl Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Trade Resaflex Rapidset

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Butynol Waterproofing Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Artificial Grass Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Carpet Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Carpet & Cork Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Floor Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Wall Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Floorfix Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Wallfix Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Premixed Mastic Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Wall & Floor Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Premixed Resaflex

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Trade Resaflex

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Super Tileset

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Multipurpose Mastic Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Universal Tile Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Construction Grout

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for depth thicknesses:
    The Dunlop Construction Grout can be used to achieve an application thickness of between 5mm to 100mm.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Coloured Silicone

  • How to measure linear metres::
    Measure the length of the surface in metres.

  • cartridges

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ready-to-Go Tile-it

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • gms

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Tile-All

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Tile-All Plus

  • How to measure linear metres::
    Measure the length of the surface in metres.

  • cartridges

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ready-to-Go Vinyl Adhesive

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • gms

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Floor Repairer Rapid Patch

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Floor Repairer Rapid Patch can be used to patch from feather edge, 0mm to any thickness. Ideal for ramping from a feather edge to normal screed thicknesses - 15mm to 30mm.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ardit Rapidset Repair Mortar

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Rapidset Repair Mortar can be used to patch from feather edge to any thickness.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Timber Floor Leveller

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Timber Floor Leveller can level from 0-12mm without the addition of aggregate and 12-30mm with the addition of 2-5mm aggregate.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ardit Floor Leveller

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Ardit Floor Leveller can level from 0-10mm without the addition of aggregate and 10-50mm with the addition of 2-5mm aggregate.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Multipurpose Floor Leveller

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Multipurpose Floor Leveller can level from 0-10mm without the addition of aggregate and 10-25mm with the addition of 2-5mm aggregate.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Multipurpose Primer

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ultra-White Grout

  • mm
  • mm
  • mm
  • mm

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Wide Joint Grout

  • mm
  • mm
  • mm
  • mm

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ready-to-Go Coloured Grout

  • mm
  • mm
  • mm
  • mm

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Flexible Coloured Grout

  • mm
  • mm
  • mm
  • mm

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Undertile Waterproofing

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Multipurpose Acrylic Render

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Multipurpose Acrylic Render can be used to achieve an application thickness of between 2-10mm

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Grout Sealer

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Natural Look Sealer

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Multipurpose Fine Coat Render

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Multipurpose Fine Coat Render can be used to achieve an application thickness of between 2-5mm

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Polish Prep

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Perfect Polish

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Ready-to-Go Render

  • How to Calculate in m2:
    Measure the width and the length in metres and multiply the width and the length together.

  • Guide for thickness:
    The Dunlop Ready-to-Go Render can be used to achieve an application thickness of between 1-5mm

  • kgs

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Dunlop Tile Pointing

  • How to calculate in linear metres:
    Measure the length of the surface in metres.

  • Ls

  • Disclaimer: Coverage will vary according to method of application, surface or substrate condition and on site conditions, the above is designed as a guide.

Added. . .